SPRING RESIDENTIAL OPENING FORM

Base Opening

Removal of mesh safety cover, folded and left on deck

Recessing of all cover anchors

Installation of handrails, ladders, diving board, and interior pool fittings (please leave by pool)

Installation and testing of underwater lights

Assembly and startup of mechanical equipment

Verification of proper equipment operation, and notification of any recommended repairs

Inspection of salt chlorine generator cell for cleaning if applicable (water temp must be above 65° for proper operation)

Inspection of cartridge filters if applicable (cleaning billed separately if requested)

Addition of opening chemicals to pool water including shock, algaecide and stain and scale preventer (chemicals billed separately)

Vacuuming and cleaning of pool will be done on a time and materials basis, if requested by owner, and needs to be scheduled prior to opening

Water must be up to operating level to complete Auto Cover Service or fabric cleaning

Fabric Cleaning may not remove all staining

Base Pool Openings Include The Following 
Services And Inspections:
Removal of mesh safety cover, folded and left on deck 
Recessing of all cover anchors 
Installation of handrails, ladders, diving board, and interior 
pool fittings (please leave by pool)
Installation and testing of pool lights (if pool is full)
Assembly of filtration equipment, cleaner pump, heater, 
and other mechanical equipment
Filtration and circulation equipment will be started 
and heater test fired if water level allows
Heater will be left off unless requested differently by owner
Pool equipment controller will be left in ‘Service’ mode 
unless requested differently by owner (if applicable) 
Inspection of salt chlorine generator cell for cleaning 
(water temp must be above 65° for proper operation)
Inspection of cartridge filters if applicable (cleaning billed separately) 
Verify proper operation of equipment, and notify owner 
of any recommended repairs
Add opening chemicals to pool water including shock, algaecide and stain and scale preventer (chemicals billed separately)



1. LOCATE YOUR ZONE HERE:
 

Zone 1: $245.00
Zone 2: $285.00
Zone 3: $385.00
Zone 4: $415.00
Zone 5: $485.00
Zone 6: Call for Quote


2. ADDITIONAL OPTIONS (Additional materials &/or hours will result in additional charges as described below):
 

Open Attached Whirlpool  $140.00  
Open Negative Edge  $150.00  
Open Separate Whirlpool/Water Feature  $195.00  
Open Fountain  $160.00 (price per basin)  
Open Deck Jets, Water Sprays, or Waterfall  $105.00  
Open Laminar Jets  $40.00 (price per jet)  
Remove Solid Waterbag Cover  $90.00  
Vacuuming & Cleaning  (T&M $85.00 per hour)  


PREVENTATIVE MAINTENANCE (parts not included):
 
Autocover Service - Standard Lid  $395.00  
Autocover Service - Stone Lid  $540.00  
Heater Cleaning & Commissioning  $395.00  
Cartridge Filter Element Cleaning  $85.00 (price per set)  
Auto Cover Fabric Cleaning  $150.00  
TOTAL CHARGES: $     (Excludes Additional: Vacuuming Hours, Parts, Cartridge Filter Element Sets & Jets)


3. CHECK PREFERRED DATE OPTIONS:
 
March 16-31
April 1-15
April 16-30
May 1-15
May 16-31
June 1-15
June 16-30



All appointments are on a first come, first served basis. Neuman Pools cannot guarantee specific days or times.
A 50% down payment is required along with completed opening form to secure your date.
Payment information will be collected at the time of scheduling.
 


What can I expect to see after my pool is opened? What am I responsible for?

If you are contemplating draining and cleaning the pool this should be scheduled prior to the pool opening date.

After The Pool Has Been Opened By Our Technicians:

All fittings, baskets, fixtures, and deck equipment will have been installed. Any items that were not poolside for the opening procedure may not have been installed or replaced. Chlorine and an algaecide will also have been added unless we have been specifically asked not to.

The heater will have been test fired by the technicians. The heater will not be left running. If you choose to start heating the pool you may see condensation that resembles leakage on some model heaters. As the water warms to 70 F. the condensation will subside. Please advise us if the situation is more than condensation and continues once the pool water temperature has increased.

If the water level is low, it will need to be raised to the middle of the skimmer opening for normal operations. When the pool/spa is at the proper level and the water is clear, slowly open the skimmer valve completely and close the main drain valve to about the 1/2 open position.

Sand Filters should be backwashed at normal pressure indicating intervals. A yearly chemical cleaning of sand filters is recommended.

Pool cleaner pumps will be checked for proper operation. Manufacturers recommend the water temperature be a minimum of 65 degrees prior to placing the cleaner into the pool. The cleaner will operate, but not efficiently until the water temperature has increased.

Pool walls and floor should be brushed and vacuumed and water circulated for a minimum of 24-48 hours before obtaining the water sample.

Customer Responsibility After The Pool/Spa Is Opened:

Brush & Vacuum pool walls and floor
Obtain water sample and balance the water
Test water daily and adjust until the pool is clean and water clear
Keep all baskets clean and backwash the filter as needed
Place pool cleaner into pool as needed once the pool is clean
Test water weekly throughout the swimming season

 



SALES TERMS & CONDITIONS - Neuman Pools, Inc.

  1. Terms and Conditions. These terms and conditions shall apply to all orders or transactions entered into by and between the buyer listed on this order ("Buyer") and Neuman Pools, Inc. ("NPI"). NPI will accept orders, sell Products and Services (defined below), and do business only on these terms and conditions. These terms and conditions, the terms and conditions on the first page of this order and any NPI quotation accepted by Buyer, shall be collectively referred to hereinafter as the "Agreement." As used herein, "Products and Services" shall mean all items being sold by NPI to Buyer, whether materials, products to be manufactured or delivered, services to be rendered or any combination thereof. NPI's acceptance of Buyer's order is expressly conditioned on Buyer's unqualified acceptance of the Agreement. Buyer, upon placing an order for the purchase of Products and Services shall be deemed to have accepted all the terms and conditions of the Agreement without modification. Buyer may also accept an order in writing or electronically. Unless otherwise agreed to in a writing signed by NPI, any term or condition contained in any Buyer purchase order or other form or correspondence that purports to add to or is in any way inconsistent with the Agreement shall be inapplicable and of no force or effect whatsoever.
  2. Time of Delivery. NPI shall use commercially reasonable efforts to fill Buyer's orders within the time stated but in no event shall NPI be liable for any damages associated with NPI's inability to meet any such timeframes or deadlines.
  3. Price; Taxes. Unless otherwise stipulated, all prices stated in NPI's quotations shall be good only for a period of thirty (30) days from the date of such quotation. Thereafter, the price for Products and Services sold hereunder shall be NPI's price in effect as of the date of shipment. Unless specifically otherwise set forth in the Agreement, Buyer shall be responsible for obtaining any and all permits or other governmental approvals required in connection with the Products and Services, and prices do not include the cost of such approvals, cost of freight or handling, cost or charges for insurance or any production, sales, use, transfer, transportation, excise or other taxes, tariffs, or customs duties, or costs arising from unforeseen, concealed or unusual conditions or circumstances, and Buyer shall pay directly or be charged by NPI for all such costs and/or charges in addition to the price(s) of the Products and Services supplied hereunder and Purchaser shall be obligated to pay such charges and costs on the same terms as apply to payment of the price(s) hereunder. NPI may make partial shipments.
  4. Shipment; Payments. As applicable, all materials and products shall be shipped F.O.B. NPI's plant, unless otherwise agreed. Risk of loss and title to Products and Services shall pass to Buyer upon performance of the services and delivery of the material or products to the carrier for shipment. Payment of each invoice shall be due, without deduction or setoff, within thirty (30) days of the invoice date. Interest of 1.5% per month will be added to all amounts outstanding more than thirty (30) days.
  5. Specifications. NPI may make any change in design of, or in the way it manufactures or produces, any Product if, in NPI's sole judgment, such changes are necessary or desirable to improve the safety or performance of such Product.
  6. Cancellation. Buyer may not cancel orders placed with NPI, except with NPI's prior written consent and then only if Buyer makes payment to NPI to indemnify it against all loss and damage incurred by NPI on account of such cancellation.
  7. Inspection. Buyer shall inspect all Products and Services within ten (10) days after receipt thereof and shall notify NPI of any rejection of such Products and Services within such ten (10) day period, after which Buyer shall be deemed to have accepted such Products and Services.
  8. Security Interest. Buyer hereby grants to NPI and NPI hereby retains a security interest in all materials and products sold hereunder and all accessories and additions thereto, whether presently upon Buyer's premises or hereafter acquired, and all proceeds from the sale or other disposition of the foregoing. Buyer hereby authorizes NPI and its agents to file any financing statements and other documents necessary to create, perfect and maintain the perfection of the security interest granted hereunder
  9. LIMITED WARRANTY. NPI warrants to Buyer that (a) at the time of delivery, the Products and Services shall conform to the written specifications approved by NPI for such Products and Services; and (b) the Products and Services shall be free from defects in material and workmanship for a period of one (1) year after the earlier of the date of: initial operation, substantial completion, last date of services or date of shipment, as applicable. THE FOREGOING LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. ANY AND ALL OTHER EXPRESS, STATUTORY OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. NO WARRANTY IS MADE WHICH EXTENDS BEYOND THAT WHICH IS EXPRESSLY CONTAINED HEREIN.
  10. Inspection and Return under Warranty. Buyer must give written notice to NPI of any suspected defect in the Products and Services within the above-described inspection period; otherwise, Buyer will be deemed to have accepted such Products and Services. Buyer must obtain a return authorization from NPI prior to returning any materials or products for warranty service under this Section. Buyer shall be responsible for all costs and expenses associated with returning the materials or products to NPI for warranty service. NPI reserves the right to apply a restocking charge of 35% of the purchase price of the returned goods, plus freight charges to all returns.
  11. LIMITATION OF LIABILITY. THE REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE AND, IN ANY EVENT, THE TOTAL AGGREGATE LIABILITY OF NPI WITH RESPECT TO ANY CLAIMS UNDER THE AGREEMENT OR REGARDING THE EQUIPMENT, SERVICES, WORK, SPARE OR REPLACEMENT PARTS AND SERVICES INCIDENTAL THERETO AS FURNISHED HEREUNDER, WHETHER BASED IN CONTRACT, INDEMNITY, TORT, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCTS AND SERVICES UPON WHICH ANY SUCH CLAIM IS BASED. IN NO EVENT SHALL NPI BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SPECIAL DAMAGES ARISING FROM ANY CAUSE WHATSOEVER, WHETHER BASED ON CONTRACT, TORT, WARRANTY OR ANY OTHER THEORY OF LIABILITY.
  12. Indemnification. Buyer shall defend, indemnify and hold NPI and its officers, directors, shareholders, affiliated companies, employees, agents and representatives harmless against any claims, losses, damages, liabilities or expenses (including, without limitation, reasonable attorneys' fees and other costs and expenses of litigation) resulting from or otherwise connected with any of the following: (a) bodily injury, death or property damage caused by Buyer's or its agents' acts or omissions with respect to the Products and Services; or (b) any design, specification, material or component supplied or approved by Buyer for the design, manufacture, installation, repair or services in connection with the Products and Services.
  13. Intellectual Property Rights. NPI shall retain all intellectual property rights in and to the Products and Services, including, without limitation, any rights under patents as well as any unpatented information such as trade secrets, confidential information, trademarks, trade dress or copyrights. Nothing in the Agreement shall be deemed or construed to be a transfer or license of any of NPI's intellectual property. Buyer shall obtain rights to such intellectual property only to the extent that NPI may grant such rights in writing.
  14. Force Majeure; Remedies; Limitation of Actions. NPI shall not be liable for any delay in the performance of the Agreement by reason of strikes, shortages, riots, insurrection, fires, flood, storm, explosions, earthquakes, telecommunications outages, acts of God, war, terrorism, governmental action or any other cause which is beyond the reasonable control of NPI. In the event of any such delay, NPI's performance hereunder shall be postponed by such length of time as may be reasonably necessary to compensate for the delay. Each of the rights and remedies of NPI under the Agreement is cumulative and in addition to any other or further remedies provided under the Agreement or at law or equity. Any action by Buyer for any loss or damage with respect to the Agreement shall be commenced within one (1) year from the earlier of the date of: initial operation, substantial completion, last date of services or date of shipment, as applicable.
  15. Miscellaneous. If any court of competent jurisdiction determines that any provision of the Agreement is invalid or unenforceable, then such invalidity or unenforceability shall have no effect on the other provisions hereof, which shall remain valid, binding and enforceable and in full force and effect, and such invalid or unenforceable provision shall be construed in a manner so as to give the maximum valid and enforceable effect to the intent of the parties expressed in the Agreement. Buyer may not assign any of its rights, duties or obligations under the Agreement without NPI's prior written consent. The rights of all parties hereunder and the construction of every provision hereof shall be governed by the laws of the State of Wisconsin, without giving affect to principles of conflicts of law. The parties agree that any action arising out of the Agreement or in connection with the goods covered hereunder shall be brought in the federal, state or local court located in or otherwise having jurisdiction over Dodge County in the State of Wisconsin and the parties hereby consent to personal jurisdiction in such courts and waive any objection based on jurisdiction or venue of any such action.
 
Agree:    Yes  
NAME:
ADDRESS:
CITY, STATE, ZIP
CELL PHONE:
E-MAIL
HOME PHONE:
SIGNATURE:
 
      * Required Fields